Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis especially developed and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic fabric transfer printing, to avert the overlap of the sample, deformation and other concerns of elastic cloth in the procedure of transfer, ensuing in a very lower pass price of transfer printing
1.Throughout the transferring , the sticky coating powEPTcould be ready to adhere the fabric and paper, but there is no glue residue on the cloth right after stripping
2.The stickiness of the fabric and paper can be adjusted by the manufacturer of the transfer paper unEPTthe advice of our firm and the viscosity is a lot more stable, which can be saved for a EPT time.
High Concentration Sublimation Coating Powder
For the recent high-pace coating EPTs, our organization independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a sound content of a lot more than 30% of the coating chemical-substantial concentration coating powder. On the basis of no escalating in charges, the coating velocity could be signnificantly enhanced, and creation capacity will be doubled than the fast-dry coating powders.
For high-velocity coating EPT generation, coating producer ought to have a mature coating technological innovation.
Quickly-dry Sublimation Coating Powder
The formulation of the first technology of EPT sublimation transfer paper coating is commonly utilised in the market place, but slowly it cann’t be matched with the requirement of higher-pace printer thanks to the large cost, lower creation efficiency and sluggish drying of printing coating.
Nano-induced secondary self-assembly methods of this coating substance , are significantly improved in the following elements:
one.The overall expense of this fast-dry mixed powEPTis lowered whilst the usability of the powEPTremains unchanged
two.This fast-dry coating powEPTcan increase the effectiveness of coating production, and the generation pace can be promoted by a lot more than twenty five%
three.Due to useful advancement, the printing drying fee of this item has been improved more than one time, and it can conserve massive amount of electrical powEPTfrom the baking lamp.
How to use our coating powder:
1.Incorporating proportional drinking water into stirring tank, maintain drinking water temperature as exact same as room temperature.
two.Put EPT bag coating powEPTslowly into agitator although stirring, and hold stirring until the chemical powEPTdissolving uniformly into water, no lump on the floor of liquid. The dissolution time is dependent on the method of agitator.
three.EPTking some samples of performing exams right after dissolving, and just take notes of glue temperature and corresponding viscosity, make sure the certified screening consequence before filtration.
four.Two instances of filtration before coating on EPT with 800-100mesh filter
5.The liquid glue continue being on EPT is recyclable although coating. It need to be through filter monitor again and can be employed in miXiHu (West Lake) Dis.ng with clean liquid coating substances.
Million-ton EPT Material(HangZhou) Co., LTD