power preserving crumb rubber EPTry diameter tire recycling EPT
The EPT tire recycling EPT will be managed by the PLC, all the supplies will be approach inside of of EPTs, there is True ZERO Pollution. 1 labor, 1 engineer can operate all the EPTs, no require to run the EPTs, just management the PLC. the EPTs can defend the EPTs, work the EPTs and maintain the EPTs function effortlessly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT adopt PLC automated management method, with computerized reversal management program in overload situation. Two-shaft tire crusher is EPTly designed for aged tires with minimal speed and substantial torque to reduce sounds and EPT usage.
The blade of the shredEPTis created of large top quality steel and subjected to Bodycote heat treatment to achieve the greatest crushing efficiency.The shredEPTis effortless to disassemble and modify cutter blade and suitable for tearing massive, additional thick and tough resources.The thickness assortment of the crushing blade is 25mm-152mm in accordance to the tire sort,output and last product. The grinEPTcan process OTR tires,huge truck tires,vehicle tires and so on at the velocity of 1-30tons whithin 1 hour.
Model | Input dimensions | Output size | Cappacity | Motor | Blades amount | Dimensions | Excess weight |
TS-800 | 800mm | fifty*50mm | one-2T/h | 2*22kw | 16pcs | 4*2.6*3.2m | 8T |
TS-1200 | 1200mm | 60*60mm | three-5T/h | 2*37kw | 20pcs | 4.eight*two.8*3.5m | 14T |
TS-1600 | 1600mm | 50-150mm | six-8T/h | two*45kw | sixteen-30pcs | five*two*three.4m | 18T |
TS-1800 | 1800mm | 50-150mm | seven-10T/h | 2*55kw | twenty-24pcs | five.six*2*three.4m | 23T |
TS-2000 | 2000mm | 75-200mm | ten-15T/h | 2*75kw | 20-30pcs | 6*two.four*4m | 36T |
TS-2400 | 2400mm | a hundred-200mm | twenty-30T/h | 2*110kw | sixteen-24pcs | 7.four*3.two*five.2m | 56T |
2.Rasper
EPT tire shredding program is developed to make up to six tons for each hour of wire free rubber mulch.This program produces up to a 99% wire totally free chip ranging in dimensions in between twelve-25mm dependent on the preferred dimension.Following processing,the steel is taken off by our magnetic separation system.At this level,the wire free rubber chips are prepared to be coloured and used for landscaping mulch and the metal is prepared to be baled and marketed to smelters.
Rasper | Motor | EPT | Capacity | Proportions | Fat | Chopping chamber | Final product |
R45 | Siemens | 45KW | 300-500kg/H | one.four*one.2*two.3m | 1700kg | 450*600mm | ten-30mm |
R55 | Siemens | 55KW | five hundred-700kg/H | 1.7*1.7*two.3m | 1850kg | 450*800mm | ten-30mm |
R75 | Siemens | 75KW | seven hundred-1T/H | 2*2*four.1m | 3500kg | 550*800mm | ten-30mm |
R90 | Siemens | 90KW | 1-one.5T/H | 2.1*two.one*four.1m | 4200kg | 550*1000mm | ten-30mm |
R132 | Siemens | 132KW | 1.5-3T/H | two*2.5*four.1m | 6100kg | 742*1200mm | 10-30mm |
R315 | Siemens | 315KW | three-6T/H | six.two*2.one*3.6m | 12400kg | 697*1562mm | ten-30mm |
3.Granulator EPT
Squander Tire Recycling Rubber Granule Making EPT is adopting physical recycling method and is made to grind the rubber mulch from the rasper into little granules as fantastic as 1-6mm. The granules are screened and re-circulated till the sought after dimension is arrived at. This Fully-Automated Tyre Recycling Line managing in typical temperature, no want to insert any other chemical compounds, no pollution to the environment. This is the best way to recycling scrap tires.
Granulator | G37 | G45 | G90 |
Motor | Siemens | Siemens | Siemens |
EPT | 37kw | 45kw | 90kw |
Ability | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
Proportions | one.8*one.six*two.4m | one.8*1.9*two.4m | two.2*2.three*3m |
Final item | 1-6mm | one-6mm | 1-6mm |
four.Miller
Rubber powEPTis the final consequence of ambient tire recycling.At this phase,crumb rubber is ground down into a thoroughly clean powEPTform with virtually all steel and fiber removed.Rubber powEPThas several secondary employs from injection molding merchandise,coatings,roofing components and different asphaltapplications.
Rubber powEPTis usually found in forty-74 microns(.40-.74mm) in size.This micron measurement metarial has the edge of being integrated into new or eXiHu (West Lake) Dis.sting formulations for a variety of polymers and completed merchandise.
Rubber powder | M2000 | M1500 | M1000 | M500 |
Input product | Large duty truck tyres to bicycle tyres | |||
Input dimensions | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
Output measurement | shred to 30-one hundred twenty mesh rubber powder | |||
Potential | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
Overall Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 6
FAQ:
Q1,Are you a factory or a investing firm?
A. We are a maker with 30 several years manufacturing experience in tire recycling EPT. We have export license, we can offer you the factory costs.
Q2. Can you guarantee the ability as you described ?
A. Undoubtedly yes,except that,we also give three-5years guarantee.
Q3, are you certain the final rubber powEPTcan be entirely clear out of wire steel or nylon ?
A. The ultimate powEPTpurity can achieve ninety nine.nine%. we have magnetic separator which can different the wire steel from the rubber powder.