Adhesive is vital assistant material of anti-theft doorway, steel wood doors, polymer doorways, which refers to make contact with with air curing solitary ingredient adhesive. With the characteristics of large bonding toughness, good weathering resistance, effortless to use, water resistance and so on, it is broadly utilised in iron and metal, galvanized metal plate, wooden composition and and so forth.
Software Desc.:
Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, etc.) EPT foam glue. Utilized in need to have filling device bonding honeycomb paper and other paper products.
Employed for bonding fireproof board, honeycomb paper in gadgets such as safety doors, etc..
Bonding polystyrene foam board for use in devices this sort of as protection doorways, etc.
Attributes:
one. Robust adhesion, shear, higher peel energy, high and low temperature resistance, hydrolysis resistance , heat resistance and aging resistance.
2. It can achieve optimum bodily efficiency after curing at area temperature and no degumming phenomenon in the approach of transfer printing of protection doorway.
three. The operational time adjustment is powerful, it can be chosen according to the distinct time and diverse curing process of Styrofoam.
four. Low toXiHu (West Lake) Dis.city solvent, without having making use of extremely toXiHu (West Lake) Dis.c solvent to lessen costs.
Specialized Index:
Viscosity(with four cups, 77 ordmF):one hundred-300s
Efficient material contentL78+-3%
Usage:
1)Brushing process: the area of the operating object is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleaning the adhesive area of stability doorway to ensure that no rust and no oil. It will influence the adhesion of Styrofoam if this element not be very good dealt with.
two)In orEPTto guarantee the power of the adhesive, spot the adhesive evenly coated scratch in the sticky surface. It is far better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue due to the fact of higher viscosity. The dosage of glue can be confirmed by the embossed depth of doorway. Brushing ought to not be way too thick, exposed time not as well EPT.
3)Shell out interest to pace the process of gluing, coating evenly. It require rapidly velocity in summer season, not brush back again and forth many instances. If the action is gradual, you can set strain in the glue EPT, will not wait around for the area glue has dried and then set pressure on. Agglutination can be managed by chilly pier or sizzling pier, the minimum time of cold pier is 3-4 hours and the minimal time of sizzling pier is fifteen-thirty minutes. The cement time more than 10 hrs, it truly is much better that the backing temperature is 190 ~ 220C deg.
4)Please seal use lid for the unused glue to avoid curing crust. The thoroughly clean of resources can use ethyl acetate solvent, or it can be soaked in warm drinking water for a number of minutes, and then wash with cleaning soap. This item must be saved in a dry, ventilated, sealed surroundings, you should do not contact the drinking water.
Attention:
In the two process of brushing glue and strain on glue, it need to be concluded in the surface drying time that normally less than twenty minutes .
EPT amp Delivery:
| EPT Specifics | 200kg/drum, eighty drums for a 20” container. |
| Shipping and delivery Time | 15 daEPTafter order |
About us:
HangZhou XiHu (West Lake) Dis.hu (West Lake) Dis. Chemical Co., Ltd. is 1 of the largest adhesive manufacturers in China, EPTizes in the analysis, manufacture and advertising and marketing of various types of adhesives, incEPTd: Water-Based mostly Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, make contact with adhesive, footwear adhesive, wallpaper glue, and so on. OEM is available listed here.
