Automatic tire recycling EPT/tyre shredEPTEPT
The first action in tire recycling procession
Weighty responsibility physique
Hooks and cross pulling die produced of forty five# metal, tempered and quenched
Equipped with safety body staying away from the dangers in the course of doing work
Two collection: Hydraulic one and mechanic 1
Easy to run and change spare elements (hooks and cross pulling die)
Cutting tires into items before shredding
Modest tire items are easier to method in shredder
Knives made of YG-20 metal, EPT using time
1 clamping cylinEPTand 1 reducing cylinder
Outfitted with a roller system to process huge tires
The large-potential shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for immediate dimension reduction of tires into cleanly minimize tire chips, dimensions 50×50 mm. Cutting shafts for the manufacturing of more substantial tire chips are accessible large torque at lower pace cut even the strongest tires into items.
All development traits are made for continuous procedure in orEPTto accomplish optimum throughput costs at lowest fees.
Extremely specific tolerances amongst the reducing knives make cleanly minimize tire chips at low power usage.
The reducing knives made of higher good quality alloy steel can be re-sharpened and reused which increases the provider daily life and reduces the functioning charges.
The complete chopping chamber is lined with difficult dress in plates.
Large doors permit for easy obtain into the cutting chamber.
The shear amongst the two rollers will make tire chips into powders as properly loosen rubbers, steels and textiles
Roller body made of forged steel
Surface area of roller produced of alloy metal, welded when worn out
A single flat surface roller and 1 teethed roller, high throughput of powders
Bottom made of solid iron
Crisis quit when overload
Length in between the two rollers can be modified.
Hard gear EPT
Outfitted with screening EPT, magnetic separator and fiber separator, 99% purified rubbers will be acquired.
Finals: eight-thirty mesh
Closing Solution(5-120 mesh tyre powder), As photo:
The exact same time, Tyre powEPTis broadly use in many market. It can make rubber tile, reclaimed rubber, auto portion Ect other people.
two-Reclaimed rubber Generating Line From Tyre Powder:
one. Dynamic desulfurization tank (one sets
Dynamic desulfurization tank
two. Open up miXiHu (West Lake) Dis.ng mill (you need to have 2-3 sets)
one. Diameter of roller: 450mm
two. Operating size of roller: 1200mm
three. Velocity of entrance roller: 24.26m/min
four. Friction ration of two rollers: one: 1.27
5. Max hole: 15mm
6. Ability: 25-50kgs
seven. Wieght: 2000kgs
eight. Motor EPT: 55KW
nine. Dimension: 6150*2280*2000mm
three. Rubber refiner( 1 sets)
1. Entrance rolle diameter: 480mm (drum )
2. Rear roller diameter: 612mm (drum)
3. Operating duration of roller: 800 mm
four. Front roller linear speed: 22.97m/min
five. Speed ratio of two rollers(entrance/rear): one: one.eighty two
6. MAX Hole: 15mm
7. Motor EPT: 55KW
8. Dimension: 4700*2100*1480mm
Closing EPT(RECLAIMED EPT):
|EPT tire pre-processing , you will get lt 50*50MM rubber crumb|
|1||Solitary hook debeader||LS-1200||one||eleven KW|
|two||EPT tyre cutter||WTC-120||1||five.five KW|
|three/4||EPT tyre shredder( with EPT tyre conveyor)||ZPS900||one||61.5 KW|
|Rubber powder processing: you will get 3-eight MM rubber powder,at the exact same time, separate the fiber and metal wire|
|5||Tyre crusher||XK560||1||seventy five KW|
|6||Huge conveyor tools||BCL-eight||2||2 KW|
|7||Tiny conveyor products||BCL-three||1||one.one KW|
|eight||Large Magnet separator||BMS22||1||2.2 KW|
|9||Small Magnet separator||SMS-one||one||one.1 KW|
|ten||Huge Shaking screen||BSS-eight||one||seven.five KW|
|11||Small Shaking screen||SSS-3||one||3 KW|
|12||Fiber separator||FS110||one||11 KW|
|thirteen||Fine grinder||XMF420||one||32.four kw|
|14||Circle shaking display||DIA600||one||2.2 kw|