Automated tire recycling EPT/tyre shredEPTEPT
The first phase in tire recycling procession
Large responsibility human body
Hooks and cross pulling die produced of 45# metal, tempered and quenched
Outfitted with protection frame staying away from the hazards in the course of functioning
Two sequence: Hydraulic one particular and mechanic a single
Straightforward to operate and alter spare elements (hooks and cross pulling die)
Cutting tires into items before shredding
Little tire items are less complicated to process in shredder
Knives manufactured of YG-twenty steel, EPT using time
A single clamping cylinEPTand a single chopping cylinder
Geared up with a roller system to method big tires
The high-capacity shredEPTwas EPTly deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for direct size reduction of tires into cleanly lower tire chips, dimension 50×50 mm. Chopping shafts for the production of larger tire chips are obtainable large torque at reduced pace minimize even the strongest tires into pieces.
All development characteristics are developed for continuous procedure in orEPTto attain greatest throughput charges at least expensive charges.
Incredibly specific tolerances among the reducing knives make cleanly minimize tire chips at lower strength consumption.
The cutting knives created of higher top quality alloy metal can be re-sharpened and reused which raises the service existence and lowers the working expenses.
The total chopping chamber is lined with difficult put on plates.
Big doors allow for simple entry into the reducing chamber.
The shear in between the two rollers will make tire chips into powders as nicely loosen rubbers, steels and textiles
Roller physique produced of solid metal
Area of roller created of alloy metal, welded when worn out
A single flat surface roller and 1 teethed roller, large throughput of powders
Bottom produced of cast iron
Unexpected emergency cease when overload
Length in between the two rollers can be adjusted.
Challenging gear EPT
Equipped with screening EPT, magnetic separator and fiber separator, ninety nine% purified rubbers will be got.
Finals: 8-thirty mesh
Last Merchandise(5-one hundred twenty mesh tyre powder), As image:
The very same time, Tyre powEPTis extensively use in numerous sector. It can make rubber tile, reclaimed rubber, automobile component Ect other folks.
2-Reclaimed rubber Making Line From Tyre Powder:
1. Dynamic desulfurization tank (1 sets
Dynamic desulfurization tank
Design technical specs
two. Open miXiHu (West Lake) Dis.ng mill (you want two-three sets)
one. Diameter of roller: 450mm
2. Functioning duration of roller: 1200mm
3. Pace of front roller: 24.26m/min
four. Friction ration of two rollers: 1: one.27
five. Max hole: 15mm
6. Ability: twenty five-50kgs
7. Wieght: 2000kgs
eight. Motor EPT: 55KW
nine. Dimension: 6150*2280*2000mm
three. Rubber refiner( one sets)
1. Front rolle diameter: 480mm (drum )
two. Rear roller diameter: 612mm (drum)
3. Functioning duration of roller: 800 mm
four. Entrance roller linear velocity: 22.97m/min
five. Speed ratio of 2 rollers(entrance/rear): one: one.82
6. MAX Hole: 15mm
7. Motor EPT: 55KW
8. Dimension: 4700*2100*1480mm
Last EPT(RECLAIMED EPT):
|EPT tire pre-processing , you will get lt fifty*50MM rubber crumb|
|one||Solitary hook debeader||LS-1200||one||11 KW|
|2||EPT tyre cutter||WTC-120||1||5.five KW|
|three/four||EPT tyre shredder( with EPT tyre conveyor)||ZPS900||1||61.five KW|
|Rubber powder processing: you will get 3-eight MM rubber powder,at the identical time, independent the fiber and steel wire|
|five||Tyre crusher||XK560||one||seventy five KW|
|6||Big conveyor gear||BCL-eight||2||2 KW|
|seven||Little conveyor equipment||BCL-three||1||1.1 KW|
|eight||Big Magnet separator||BMS22||1||2.two KW|
|9||Small Magnet separator||SMS-one||one||one.1 KW|
|ten||Huge Shaking display||BSS-8||1||seven.5 KW|
|11||Small Shaking display screen||SSS-3||one||3 KW|
|12||Fiber separator||FS110||1||11 KW|
|thirteen||Fantastic grinder||XMF420||one||32.four kw|
|14||Circle shaking screen||DIA600||one||2.2 kw|