Along the way of Kids Room Wall paper wallpaper paving, many people believe weighed against parquet wallpaper, plain wallpaper is simpler and far more convenient to use without mosaic. It turns out that basic wallpapers are simple and easy to construct because they haven’t any patterns, however the relative stitching requirements are even more stringent. Plain colors, especially darker plain shades, are relatively more prone to seam problems. If the ordinary wallpaper includes a seam phenomenon, what is the explanation for judging the seam? After that take the correct approach.

1. There is a gap
If the seam sometimes appears at 1.5m on leading side, there is absolutely no color difference in the wallpaper. Is it serious to handle the seams during construction? Most of the factors behind the seams are due to construction problems.
1. If the wallpaper is definitely a rubberized wallpaper, you can wet the seam with a wet towel, open up the wallpaper glue, lightly pry open up the wallpaper, and then utilize the wallpaper softener to soften the wallpaper to extend the wallpaper and fix the seams.
2. If it is a pure paper wallpaper or a non-woven wallpaper, there is nearly no stretchability, so it cannot be repaired by the above method. The base could be shaded with a paint-coated seam that’s very similar in color to the wallpaper.
2.Yin and Yang
If there is obviously no overall feeling between your wallpaper strips at 1.5m on leading aspect, the seams of the wallpapers are handled well in close distances, and there is absolutely no obvious seam phenomenon. It appears that the wallpaper appears like a color difference, and the color difference at the seam is normally in accordance with the obvious law of deep-shallow-deep-light or shallow-deep-shallow-deep, which may be caused by the yin and yang.
Discover the label of the wallpaper and see when there is an alternate label at the top and bottom level of the label – ↑↓.

1. If there is, it requires to be alternately pasted according to the logo, ie: shallow-shallow-deep-deep relative to avoid the phenomenon of yin and yang.
2. When there is no logo design, it is caused by the product quality problem of the wallpaper. There is no solution in fact it is necessary to react to the wallpaper sales workplace.

3 white side
If underneath paper is found to be slightly longer when the dark wallpaper is constructed, you will have a white advantage at the seam after the construction. The gap can be clearly visible far away of 1 1.5 m from leading of the wall.

1. Because the wallpaper is not constructed with ordinary wallpaper, the seam could be treated by the method of edging.
2. If the wallpaper has been built, it can be used in the same color as the wallpaper. (This is a versatile method)

4 overflow glue
The plain wallpaper is not easy to erase after filled with glue, and there are residual rubber marks after rubbing.
1. When constructing, be certain to check on whether there is an “along alternate” construction tag on the wallpaper label. If there is this logo design, the wallpaper should be positively and negatively published. If there is still a negative and positive surface area phenomenon, you can test normal stickers again.
2, plain color non-woven wallpaper construction should stay away from spilling glue, prevent wiping, after the wiping strength is certainly large, it may leave traces. If you are unfortunate plenty of to spill the glue, you should wipe the spilled glue in the tiniest range, and the softer color of the ordinary wallpaper should be gentle.
3, rubber surface plain wallpaper, the initial wallpaper paste for half an hour must pay attention to check whether the seams of the wallpaper possess offset printing. If there is offset printing, it means that the rubberized wallpaper can’t overflow, and the glue will keep traces.