MDF Steel Laminate Labeled Door PU Rubber Binder

Adhesive is important assistant material of anti-theft doorway, steel picket doorways, polymer doorways, which refers to make contact with with air curing solitary element adhesive. With the features of substantial bonding energy, great weathering resistance, effortless to use, water resistance and so on, it is extensively utilized in iron and metal, galvanized steel plate, wood composition and and so on.

Software Desc.:

Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, etc.) EPT foam glue. Employed in need to have filling system bonding honeycomb paper and other paper goods.

Utilised for bonding fireproof board, honeycomb paper in gadgets this sort of as security doorways, and so on..

Bonding polystyrene foam board for use in units this kind of as protection doorways, etc.


one. Sturdy adhesion, shear, substantial peel strength, large and low temperature resistance, hydrolysis resistance , heat resistance and ageing resistance.

2. It can accomplish ideal bodily efficiency after curing at place temperature and no degumming phenomenon in the procedure of transfer printing of security door.

three. The operational time adjustment is robust, it can be chosen according to the various time and diverse curing approach of Styrofoam.

four. Lower toXiHu (West Lake) Dis.metropolis solvent, without making use of hugely toXiHu (West Lake) Dis.c solvent to reduce charges.

Technological Index:

Viscosity(with 4 cups, 77 ordmF):a hundred-300s

Powerful compound contentL78+-3%


1)Brushing approach: the surface of the operating object is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleaning the adhesive surface of stability doorway to guarantee that no rust and no oil. It will effect the adhesion of Styrofoam if this element not be good dealt with.

two)In orEPTto guarantee the strength of the adhesive, place the adhesive evenly coated scratch in the sticky surface area. It really is far better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue since of higher viscosity. The dosage of glue can be verified by the embossed depth of door. Brushing ought to not be too thick, uncovered time not way too EPT.

three)Pay attention to pace the method of gluing, coating evenly. It require quickly speed in summertime, not brush back and forth many occasions. If the motion is gradual, you can set stress in the glue EPT, will not hold out for the surface glue has dried and then set pressure on. Agglutination can be dealt with by cold pier or hot pier, the minimum time of chilly pier is three-4 hours and the minimal time of scorching pier is 15-30 minutes. The cement time in excess of 10 hrs, it truly is far better that the backing temperature is a hundred ninety ~ 220C deg.

4)You should seal use lid for the unused glue to steer clear of curing crust. The thoroughly clean of instruments can use ethyl acetate solvent, or it can be soaked in warm drinking water for a few minutes, and then wash with cleaning soap. This item must be stored in a dry, ventilated, sealed surroundings, make sure you do not touch the h2o.


In the two process of brushing glue and force on glue, it must be finished in the surface drying time that normally considerably less than twenty minutes .

EPT amp Shipping and delivery:

EPT Specifics 200kg/drum, 80 drums for a 20” container.
Delivery Time 15 daEPTafter purchase

About us:
HangZhou XiHu (West Lake) (West Lake) Dis. Chemical Co., Ltd. is one of the largest adhesive producers in China, EPTizes in the investigation, manufacture and advertising and marketing of various sorts of adhesives, incEPTd: Drinking water-Based Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, make contact with adhesive, footwear adhesive, wallpaper glue, and so on. OEM is offered here.

MDF Steel Laminate Labeled Door PU Rubber Binder

MDF Steel Laminate Labeled Door PU Rubber Binder