Mixable with Color Dye or Mica Power Epoxy Resin Crystal and Haeder Epoxy Vinyl Ester Resin Glue Good Corrosion Resistance

Mixable with Colour Dye or Mica EPT Epoxy Resin Crystal

Item (MTB-2103) Epoxy Resin(A ) Epoxy Resin(B )
Shade Clear Liquid Transparent Liquid
Viscosity@twenty five ordmC(mpa.s) 380-450 30-40
Mix Ratio(by bodyweight) 2 1
Hardness(Shored) 75-80
Operation time(100g blended glue ,25 ordmC) 50-60minutes
Curing Time(twenty five ordmC) 24-26hours
Curing Time(35 ordmC) 8hours
Curing Time(25 ordmC) 6-12months

MTB- 2103 is a crystal-distinct, low-viscosity epoxy resin and is developed and distributed solely in premium quality. MTB-2103 is excellent for practically any application. For case in point: in the jewelery sector, desk production, for river tables for flooring, ponds,aquarium and terrarium building, as properly as for boat, ship and aircraft design.

Mixable with Shade Dye or Mica EPT Epoxy Resin Crystal

Item Edge

* Non-toXiHu (West Lake) Dis.c
* 100% Reliable
* VOc Cost-free
* Solvent Free
* Crystal Very clear
* Epoxy Resin and hardener,blend ratio of two:one
* Thick Pour to 2 quot-four quot

1. Mirror-Like Crystal Obvious End
The Greatest super wet with gloss end with unpXiHu (West Lake) Dis.Hu (West Lake) Dis.leled depth and clarity that is formulated to use inside of all coating and step casting apps

2. Higher-Grade EPTResistance

All epoXiHu (West Lake) Dis.es will flip yellow additional time. What helps make our Super obvious Epoxy resin crystal obvious package distinct is our certain large-grade additive formulation. Ours will yellow much less and continue being ultra-crystal-obvious in excess of a EPTer interval of time than any of our competitors. Our items are produced for you, and manufactured to last, bar none.

3. Combine Color With Simplicity

Completely suited for accepting and dispersing mica powEPTpigments, liquid pigments paste and liquor inks and dyes.It is the excellent epoxy for evenly distributing coloration and suspending inks and powders. Paint, acrylic paint and oil based mostly paint are not advisable to use with epoxy, and can have damaging final results.

4.Food and drug administration Grade ampMSDS
To consiEPTa solution foodstuff safe, the stop item need to be examined. Considering that each and every undertaking is created by a diverse artisan and not in the identical actual way, and our merchandise comes in two elements that must be mixed, every single finished piece have to be analyzed. When Super Obvious EPTble Top Epoxy has healed, it turns into protected, for each Food and drug administration code, 21CFR175.three hundred which states quotReEPTus and polymeric coatings may possibly be securely utilized as the foodstuff make contact with floor of posts meant for use in creating, producing,EPT, processing, making ready, managing, EPT, transporting, or EPT meals quot and can be utilized as a quotfunctional barrier in between the foodstuff and the substrate quot and quotintended for recurring food-make contact with and use. quot

5.Advanced Formula for Strengt
With tables, desk tops and counter tops you need durability.That is why we crafted an epoxy formulation with an 80 Shore D Power Score when entirely fixed.

6. one hundred% VOC Cost-free amp Nearly Odorless ampSelf Leveling ampZero Shrinking

Mixable with Coloration Dye or Mica EPT Epoxy Resin Crystal

How to use

Phase one: The best operating temperature is around a continual 77 degF. Best outcomes can be obtained at continuous temperatures among 70 degF and 85 degF, in a clear, dry, dust-free surroundings. Steer clear of working in substantial humidity. We suggest using this solution on a leveled and flat perform surface.

Step 2: Measure merchandise in accordance with your intended use. Put together two components Foundation Resin to one component Curing Agent by liquid volume.Pour the Curing Agent very first and then the Foundation Resin into a clear, easy-sided container big adequate to maintain all the liquid and let place for miXiHu (West Lake) Dis.ng.

Phase three: The materials have to be blended extensively for at minimum three minutes. Be positive to scrape the container sides, base, and corners as you mix. Be watchful not to whip abnormal air into the combination. If miXiHu (West Lake) Dis.ng a gallon, use a EPT mixer set to quothand speed. quot For smaller quantities, use stir sticks. Do not combine more than a gallon. Pour into a new, cleanse container and blend for an added minute.

Stage four: Pour the combined resin onto the surface and distribute evenly with a squeegee or gloved hand. Carry on to pour remaining substance to obtain the desired thickness, allowing the resin to movement evenly over the project’s sides. Resin can be poured up to one/four quot thick per pour.

Action 5: Use a warmth resource these kinds of as a heat gun to get rid of any bubbles by incorporating a little volume of warmth to the encompassing spot. The bubble will increase to the surface and pop.

Phase 6: If you are likely to make a 2nd pour, the initial pour must still be a bit sticky. After the 2nd pour is produced, bubbles could when yet again need to have to be removed. Substance will feel tough soon after forty five-sixty minutes, cure to the stage of workability within 24 several hours, but full treatment and maXiHu (West Lake) Dis.mum hardness can call for up to 7 times, dependent upon the temperature.

EPT ampShipping

—15OZ/kit
—24OZ/kit
—1.5KG/package

—3KG/package

—1.5Gallon/package
—3Gallon/kit

—15KG/package

Take package and label OEM ampODM

FAQ

1.Q: What is actually the ideal way to blend this?

A: You’ll want to make sure that you have 2 parts foundation resin and 1 element curing agent measured specifically, by quantity. Pour every into your miXiHu (West Lake) Dis.ng bucket, and we advise miXiHu (West Lake) Dis.ng by hand for at least three minutes and in between three-five minutes or until finally it is totally blended. Be mindful to scrape the

sides although miXiHu (West Lake) Dis.ng, but when pouring, do not scrape the sides. This can impart unmixed content that might cling to the aspect and has not been included. Never be concerned about any bubbles in the combination, they will all function by themselves out.

two.Q: How EPT does it get to heal, and what temperatures can I pourthis in?

A: Our optimum surroundings temperature variety is 72 deg – 84 degF (in a clear, temperature managed surroundings. In that temperature assortment, it will get started to gel in twenty-30 minutes, and remedy rock difficult within 24 several hours.Temperatures unEPT70 deg will gradual the curing procedure even more, and the nearer you get to sixty deg the curing method will end. Over eighty five deg, it will begin to speed up curing, major to cracking, shrinking and other adverse benefits.

three.Q: Is your epoxy Fda Compliant?

A: The limited reply is, of course. As soon as our epoxy has fixed, it becomes risk-free,for each Food and drug administration code, 21CFR175.300 which states quotReEPTus and polymeric coatings might be securely utilised as the foods-get in touch with surface of articlesintended for use in generating, manufacturing, EPT, processing,

getting ready, managing, EPT, transporting, or EPT meals quot and can be used as a quotfunctional barrier between the meals and the substrate quot.

four.When Can I Demould?

A: Our ideal surroundings temperature range is seventy two deg – eighty four degF in a clean temperature managed setting. In that temperature variety, you can demould amongst 18 and 24 hours, and its best workability will be at 24-thirty several hours. At thirty several hours it will sand and plane as straightforward as wood!

Mixable with Color Dye or Mica Power Epoxy Resin Crystal and Haeder Epoxy Vinyl Ester Resin Glue Good Corrosion Resistance

Mixable with Color Dye or Mica Power Epoxy Resin Crystal and Haeder Epoxy Vinyl Ester Resin Glue Good Corrosion Resistance