Your house decoration process is different, and the detail is certainly very much. Wallpaper development is the final method that the house decorates hard outfit, soft costume begins. The wallpaper should certainly be in the carpentry, color, water and electricity, filling all hardware finish, and have been cleaned following one time.

1. Floorboards and skirting are installed

❖ avoid play keel, saw wood flooring and so on make the wallpaper.

❖ to prevent shock when install the line that play a base, wallpaper and metope separation, thus appeared the wallpaper bubbling, become warped edge phenomenon.

❖ to avoid cutting the line that play a base when large amounts of particles pollution and wallpaper bruised.

❖ general putty can be not batch to the basis bottom, first wallpaper can’t cut neatly, susceptible to turn into warped edge, using a very long time lead to the wallpaper into the coils.

❖ to prevent the range that play basics for glass glue wallpaper seal off up, unable to produce the wall of the water molecules emissions, business lead to the line that play a base position wallpaper mildew.

❖ enjoy crural line, likely wall structure and play crural brand straightness is not enough or have crack, the wallpaper has a cover up aperture effect.

2 cover and door are installed

❖ install door first, can enough time wallpaper ruined and getting dirty, as well facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, along with stopping lines) will stain the wallpaper if applied effectively.

❖ door size may have a discrepancy, if perhaps small size, wallpaper, initially door will appear bare phenomenon; If fully pasted, it is easy to pull the wallpaper once installing the door, producing damage to the wallpaper.

Wooden paint can not always be finished with wallpaper, after making wood paint

❖ because carpentry paint the moment construction, atomization, the color will stick on the wallpaper. And when fresh paint construction, want to tackle protecting to finished merchandise, especially the periphery metope such as cabinet, door, partition should stick defensive film, if atomize to metope, to the structure quality of wallpaper is certainly not assured, give a problem very easily.

3 or more. Air conditioning holes

❖ avoid wallpaper damage of drilling hole.

❖ avoid wall vibrations cause the wallpaper off when striking.

❖ to avoid dust pollution when punching wallpaper.

The holes of the curtain hanging rod possess been made in progress

The positioning of curtain hanger rod support is very well designed and holes are made to avoid contaminating the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such because some difficult to do wallpaper, prior to paste must be made in advance to hang the curtain rod holes.

How you can paste the wallpaper

Eliminate the wall skin: remove the original paint and other objects within the wall, work with gypsum powder to fix the cracked parts of the wall, and apply the bandage after leveling; Whenever the sand and dull walls, partition walls, nonetheless also paste glass cloth or cloth netting; Several of the low quality dividers or external walls to reach the insulation effect, need to be total of nail plasterboard.

Minimize wallpaper: measure metope level first, cut wallpaper period again, have two varieties of circumstance: do certainly not add cut 5 to 8 centimeters by metope height according to metope height left and right sides period, use as up and down repair edge: to invest wallpaper needs to consider the symmetry of design, reason cut length should increase according to genuine circumstance, can lengthen eight to 10 centimeters commonly.

Coating adhesive solution: picture glue solution with coating around the back of cutting good wallpaper brush, pay special attention fully glue around the edge to liquid, in order to ensure the construction quality, pasted wall paper and glue in the face of folding place 5-10 a few minutes (attention, nor the exterior force, in order to avoid wallpaper in crimp, especially it’s ok cloth) completely through the stuff liquid into the lower part of the paper can easily be posted, besmear brushs number of wallpapers, every time and in order to post.

Wall membrane paper construction: it is certainly to be in generally door edge or shade Angle from go straight down to paste first wall paper, by scraping panel from go down, simply by introversion outside, blow conventional paper paper gently, extrude bubble and superfluous glue liquefied, make wall paper is certainly even close to metope.

Before pasting wallpaper, shut off power: when pasting wallpaper, if encounter the place that has power-switch or Non-Woven Wall covering socket on metope, can turn off total power first, cover wall membrane paper next all ability supply and socket, slice two diagonals from centre of gravity point, can show 4 small triangle, reoccupy art tool takes away all round redundant picture.

Trim cleaning: cut off the extra wallpaper at the two ends of the top and lower ends, and make the blade razor-sharp to prevent rough edges. Dip in water with cloth or sponge to wipe the glue liquid that remains about the wall paper area completely clean, lest wall membrane paper becomes yellow, after wall paper is dried out, if discover a bubble on the surface, cut wide open with the knife try out glue liquid again press flat can eliminate (with needle tube better)