Professional Powder Coating for Radiator

Skilled PowEPTCoating for Radiator

one.EPT introduction:

Our firm is a producer EPTized in the analysis deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ment and generation of thermosetting powEPTcoating for far more than 20 years. Our company create and handle all types of thermosetting powEPTcoating incXiHu (West Lake) Dis.Hu (West Lake) Dis. epoxy polyester, pure polyester and so on. In accordance to the needs of clients, we can generate various shades or diverse efficiency of the thermosetting powEPTcoating. As a end result of our large quality merchandise and outstXiHu (West Lake) Dis.Hu (West Lake) Dis. consumer support, we have estabEPTd the associations with several properly-recognized EPTrprises at property and abrord. If you are intrigued in any of our products or would like to discuss a personalized buy, remember to come to feel free of charge to make contact with us and welcome to XiHu (West Lake) Dis.Hu (West Lake) Dis.. We are searching EPT to forming productive company associations with new clients about the planet in the long term.

two.Item series:

We Offer high ligEPT (above 86%), simple glass(seventy six-85%), matt (20-50%) and lower ligEPT (beneath 20%) of the complete-coloration powEPTcoatings items.Gloss can also be controlled in accordance to the user’s requirements.

3.EPT:

Carton EPT, lined with double polyethylene bag, internet weigEPT twenty kg.

four.Storage needs:

Retailer below 30 degC, ventilated, dry, thoroughly clean space, not in close proximity to the fireplace, heat, immediate sunlight, open up dumps is prohibited.UnEPTthis issue, the powder can be steady for 12 months, a lot more than the storage time period may be re-examined, these kinds of as the final results meet the requirements, can still be employed.

5.PowEPTphysical qualities:

Proportion : 1.one-one.8 (depending on the shade and gloss )

Particle measurement distribution: 100% much less than one hundred twenty five microns(far more than 85% among

60-90).

Liquidity:18~35mm.

Curing conditions:180 degC,15minutes.

six.Overall health and safety:

This product is non-toXiHu (West Lake) Dis.c. In the course of inhalation of dust must be avoided. The operators need to dress in suitable dust mask and glasses.

seven.Coating functionality

Coating performance
Test products Inspection stXiHu (West Lake) Dis.Hu (West Lake) Dis.rds Examination indicators
Large mild Glazed/Matte/Reduced light-weight
EPEPTct resistance ISO6272 GB/T1732-1993 50kg/cm 40kg/cm
Cupping test ISO1520 GB/T9753-1988 8mm 7mm
The adhesion (grid technique) ISO2409 GB/T9286-1998
Bending ISO1519 GB/T6742-1986 2mm 3mm
Pencil Hardness ASTMD3363 GB/T6739-1996 1H-2H
Salt spray take a look at ISO7253 GB/T1771-1991 gt500 several hours
Moist warmth test ISO6270 GB/T1740-1979 gt1000 hrs
Warmth resistance a hundred and ten degC/24 several hours(white) Good gloss retention,E le0.3-.four
Florida weathering publicity ISO2810 South forty five deg,12mons Gloss retention ge50%
Artificial accelerated ageing sixty degC/8hours + 50 degC/4hours condensing,cycle for 500hours Gloss retention ge50% Shade balance:E le0.35
Annotate: one.The previously mentioned experiment employs .8mm steel with degreasing and rusting, and the coating thickness are 50-70 microns.
2.The over coating performance could be decrease as shiny and slightly reduce.

eight.Why pick our items?

one). We have our very own manufacturing facility. The very good top quality and the competitive is the benefit of our organization.
two). The substance we decide on is often good and goods often come out with high top quality.
3). A trial buy or sample orders are welcomed.
4). Our merchandise are exported to Europe, America, Southeast Asia, and other international locations and locations in the entire world.
5). We will do our very best to provider you all the time if you have the even more query.

Professional Powder Coating for Radiator

Professional Powder Coating for Radiator