rubber powEPTEPT cost recycling EPT for waste tyre
The EPT tire recycling EPT will be controlled by the PLC, all the supplies will be approach inside of EPTs, there is Genuine ZERO Pollution. one labor, 1 engineer can run all the EPTs, no need to have to work the EPTs, just control the PLC. the EPTs can defend the EPTs, function the EPTs and hold the EPTs perform efficiently.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automatic manage program, with automatic reversal management system in overload issue. Two-shaft tire crusher is EPTly made for aged tires with minimal pace and higher torque to reduce sound and EPT intake.
The blade of the shredEPTis created of substantial good quality steel and subjected to Bodycote warmth remedy to attain the very best crushing performance.The shredEPTis straightforward to disassemble and alter cutter blade and suitable for tearing large, further thick and difficult components.The thickness range of the crushing blade is 25mm-152mm in accordance to the tire sort,output and final item. The grinEPTcan approach OTR tires,huge truck tires,car tires and so on at the speed of 1-30tons whithin one hour.
| Design | Enter dimension | Output measurement | Cappacity | Motor | Blades quantity | Proportions | Excess weight |
| TS-800 | 800mm | fifty*50mm | 1-2T/h | 2*22kw | 16pcs | four*two.6*three.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | two*37kw | 20pcs | 4.8*2.eight*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | six-8T/h | two*45kw | sixteen-30pcs | 5*2*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | two*55kw | 20-24pcs | five.6*2*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | ten-15T/h | 2*75kw | 20-30pcs | six*two.four*4m | 36T |
| TS-2400 | 2400mm | one hundred-200mm | 20-30T/h | two*110kw | sixteen-24pcs | seven.4*3.two*five.2m | 56T |
two.Rasper
EPT tire shredding system is created to generate up to six tons for every hour of wire free rubber mulch.This technique makes up to a 99% wire totally free chip ranging in dimension in between 12-25mm dependent on the wanted dimensions.After processing,the metal is taken off by our magnetic separation technique.At this level,the wire free rubber chips are ready to be colored and employed for landscaping mulch and the steel is completely ready to be baled and bought to smelters.
| Rasper | Motor | EPT | Capability | Proportions | Bodyweight | Chopping chamber | Closing item |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.four*one.2*two.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | one.7*one.7*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven hundred-1T/H | 2*two*4.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | one-1.5T/H | two.1*2.1*four.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | two*two.5*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | six.two*2.1*3.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Creating EPT is adopting physical recycling technique and is developed to grind the rubber mulch from the rasper into modest granules as good as 1-6mm. The granules are screened and re-circulated until finally the preferred dimensions is achieved. This Entirely-Computerized Tyre Recycling Line managing in standard temperature, no need to include any other chemicals, no pollution to the environment. This is the very best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capability | three hundred-500kg/h | 500-800kg/h | 800-1500kg/h |
| Proportions | one.eight*one.6*2.4m | 1.eight*1.nine*2.4m | 2.2*2.three*3m |
| Last product | one-6mm | 1-6mm | one-6mm |
four.Miller
Rubber powEPTis the final result of ambient tire recycling.At this phase,crumb rubber is floor down into a clean powEPTform with almost all steel and fiber eliminated.Rubber powEPThas several secondary employs from injection molding products,coatings,roofing components and numerous asphaltapplications.
Rubber powEPTis typically discovered in 40-seventy four microns(.40-.74mm) in dimensions.This micron size metarial has the gain of becoming integrated into new or eXiHu (West Lake) Dis.sting formulations for various polymers and finished goods.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input solution | Large duty truck tyres to bicycle tyres | |||
| Enter measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimensions | shred to thirty-120 mesh rubber powder | |||
| Capacity | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Total Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a factory or a trading company?
A. We are a maker with 30 many years creation knowledge in tire recycling EPT. We have export license, we can offer you the manufacturing facility costs.
Q2. Can you promise the capacity as you talked about ?
A. Certainly sure,other than that,we also provide 3-5years guarantee.
Q3, are you positive the final rubber powEPTcan be completely clear out of wire steel or nylon ?
A. The closing powEPTpurity can achieve ninety nine.nine%. we have magnetic separator which can independent the wire metal from the rubber powder.
