|EPT is an excellent base to print on uEPTzing the newest in EPT technological innovation and EPTized graphics plans. Best for signage and complete shade photos, EPT can be utilised the two as
individually printed panels and for multi-panel displays. Specific repeat measurements are not required and
everything can be printed from logos, phXiHu (West Lake) Dis.Hu (West Lake) Dis.raphic imagery and graphics. If it can be scanned and
digitized, it can be printed on to EPT polyester fiber panel. As it is an EPT printing procedure your colour choice and number is limitless. 1200*600mm custom made print samples are available at cost. Photos must be a minimum of 600 wide at 300DPI. Photographs more compact than this may possibly print with pixelization or appear blurry.
We are pleased to get your pictures and make them print-completely ready.
proper print placement and sizing on panels. This borEPTcan be trimmed at the print edge to take away
EPT display printed panels will have an unprinted borEPTapproXiHu (West Lake) Dis.mately 1cm extensive to guarantee
this borEPTand develop a clear edge to join panels. Designs do not exactly edge match, but repeats
can be discovered to create seamless patterns. Check the EPT panel prints spec sheet for details on
repeats for each and every pattern.
EPT is committed to ideal exercise via our ISO 9001 and ISO 14001 accredited High quality and Environmental Administration Systems.
EPT products is made up of a least of 75% beforehand recycled polyester fiber (from PET bottleflake)
making sure comparatively low embodied energy.
Off-cuts and manufacturing waste is re-employed or
recycled where ever achievable.
Uncontaminated EPT polyester fiber panel can be recycled.
EPT polyester fiber acoustic panel is made from 100% polyester fibers and does not include chemical binders incXiHu (West Lake) Dis.Hu (West Lake) Dis.
formaldehyde. EPT polyester fibers assist safer
indoor air good quality and will not become a likely
EPTckboard, hook-and-loop receptive surface, acoustic wallcovering. Accepts tacks and staples
ToXiHu (West Lake) Dis.town
Polyester is classed as no more toXiHu (West Lake) Dis.c than wooden unEPTthe condition of EPT York Article fifteen portion 1120. Polyester is pH7.8 (where pH7. is neutral),resistant to organic, bacterial or vermin attack.
Not adversely influenced at influence velocities over 52.5ft/s
Polyester fiber Non-woven. No pattern repeat but Panel has a directional grain. Product might vary from samples and batch to batch thanks to fiber mixing and lay-up which is an inherent characteristic of this merchandise.
Physical description / houses
Boiling Position: N/A
Melting Point: 428 ordmF
Vapour Stress: N/A
Distinct Gravity: Polyester 1.38
Flash level: N/A
Explosive limitations: N/A
Solubility in h2o: Not soluble
Alkalinity: pH seven.eight
Relative Vapour Density: N/A
Cleansing And Treatment:
Remove dust and dirt by dusting, vacuuming, or with a comfortable fabric or sponge and a solution of carpet
or upholstery shampoo. AlwaEPTuse a delicate, damp cloth and blot dry. Place cleaner
Professional Instantaneous Location Remover has been used with success for ligEPT soil. No assure is offered for cleaning benefits with this solution.
For additional info about our panel or any other
EPT product, please speak to your installation