Sticky Sublimation Coating Powder
Sticky sublimation coating powEPTis exclusively created and deveXiHu (West Lake) Dis.Hu (West Lake) Dis.ed for the elastic material transfer printing, to stop the overlap of the pattern, deformation and other troubles of elastic material in the method of transfer, resulting in a very reduced move rate of transfer printing.
Characteristic:
one During the transferring, the sticky coating powEPTcould be capable to stick the material and paper, but there is no glue residue on the fabric after stripping
two The stickiness of the fabric and paper can be modified by the company of the transfer paper unEPTthe guidance of our firm and the viscosity is more secure, which can be saved for a EPT time.
High Focus Sublimation Coating Powder
For the recent high-pace coating EPTs, our firm independently deveXiHu (West Lake) Dis.Hu (West Lake) Dis.s a solid content material of far more than 30% of the coating chemical – higher concentration coating powder. On the basis of no rising in fees, the coating pace could be drastically improved, and production capability will be doubled than the quick-dry coating powders.
Attribute:
For high-speed coating EPT manufacturing, coating manufacturer ought to have a experienced coating technological innovation.
Quickly-dry Sublimation Coating Powder
The formulation of the very first generation of EPT sublimation transfer paper coating is commonly employed in the market place, but steadily it can’t be matched with the need of high-pace printer because of to the large value, lower creation efficiency and slow drying of printing coating.
Attribute:
Nano-induced secondary self-assembly strategies of this coating content, are greatly enhanced in the adhering to factors:
1 The total cost of this quickly-dry blended powEPTis reduced although the usability of the powEPTremains unchanged
2 This fast-working day coating powEPTcan improve the effectiveness of coating creation, and the production speed can be promoted by much more than 25%.
three Thanks to practical advancement, the printing drying price of this item has been enhanced much more than one time, and it can savelarge quantity of electrical EPT from the baking lamp.
How to use our coating powEPT:
- Introducing proportional drinking water into stirring tank, preserve water temperature as exact same as place temperature.
- Set EPT bag coating powEPTslowly into agitator while stirring, and hold stirring until finally the chemical powEPTdissolving uniformly into h2o, no lump on the surface of liquid. The dissolution time depends on the approach of agitator.
- EPTking some samples of performing checks after dissolving, and take notes of glue temperature and corresponding viscosity, make certain the competent tests end result prior to filtration.
- Two moments of filtration before coating on EPT with 800-100mesh filter
- The liquid glue stay on EPT is recyclable even though coating. It should be by way of filter monitor again and can be utilised in miXiHu (West Lake) Dis.ng with refreshing liquid coating substances.
JoinGoal EPT Materials(HangZhou) Co., LTD
TEL :86~13 0571 88828 138581177787 62890542
FAX: 86~571-8822571/8822 0571 -67913566
Site: http://en.sign up for-objective.com
