Whenever we put wallpapers, we generally encounter problems such as this. In particular, most of the friends who want to do their very own wallpapers are more than they need, and finally they will find there are always some little flaws.
In fact, as long as the construction is looked after, these problems can be avoided. Today, we will choose these problems and focus on solving them!
Base film peeling
1) Before brushing the bottom film, check if the wall is standard, no powder, no floating coating.
2) Is there a slight crack in the wall structure?
3) If the construction temperature is over 5 degrees.
4) Brush the bottom film too heavy when it is first, and brush the second one when it is not dry. Due to the difference in drying time taken between the inner and outer layers, it could cause peeling.
5) Whether the foundation film is too thick, could be relieved by adding drinking water. After polishing with sandpaper, re-brush the base film.
The treatment of the bottom film has a great influence on the wallpaper effect, and the most immediate effect may be the stability of the wallpaper. Therefore, the bottom film should be handled relative to certain requirements of the guidelines, combined with the actual situation.
Glue overflow
Glue overflow is a common phenomenon along the way of wallpapering. Through the construction process, try to avoid the glue overflowing the wallpaper surface through the paper tape. The rubber surface area wallpaper is relatively easy to clean. You can use all of the wallpaper except the rubber tape wallpaper. Paper tape construction is recommended.
1) Clean with a damp sponge for a surface washable wallpaper.
2) Use a dry towel to eliminate it, ideal for wallpapers that can’t be stained on the top.
3) Absorbed with a wet sponge, ideal for wallpapers with contaminants on the surface.
There are signs at the joint seam
The handling of wallpaper seams has always been an integral part of wallpaper construction, and many professional construction masters have their own tips. For the layman, pay special attention to the construction. When the wallpaper was applied, the glue didn’t completely hurry out and piled up at the seams. The glue reacted with the wallpaper for a long time.
Remedy: 60-80 degrees boiling water a little bottle, and also a bottle of white vinegar, wait for the drinking water to cool down, squat in the seam. (Recommended for partial testing), the wallpaper can last better in 1-2 months, and 80% of the traces could be removed.
Wallpaper shrinking
The phenomenon of wallpaper shrinkage is principally due to the workers’ lack of strict seams during construction, that leads to the problem in the afterwards stage, which is related to the construction technology of the workers. Because the wallpaper is made from wood pulp, it gets the characteristics of hardwood swelling and shrinking, the performance isn’t particularly stable, you will see a certain expansion following the glue is finished, and shrinkage occurs during the drying procedure. Although the growth is uncontrollable, workers can control shrinkage during structure.
The majority of the wallpaper shrinks are invisible unless the joints are not enough. In this instance, it is generally better reserve a coincident portion at the joint. Generally, it really is preferable that the joint overlaps at 1-3 cm.
If shrinkage has already occurred, the repair Modern Style Wallcoverings process is relatively simple. Use a wet towel dampened with water to soak the seam for ten minutes, and use the advantage of the wallpaper knife to choose the wallpaper, that may usually be picked up. If the attachment on the top of wallpaper is a metal surface, it really is easy to make the surface of the wallpaper tarnish and black after scraping, in fact it is not recommended to operate.
Wallpaper moldy
1) The wallpaper is moldy and generally offers spots on the surface of the wallpaper.
(1) The wall should be inspected for drinking water seepage.
(2) If the glue is completely dry.
(3)When wallpaper is definitely applied, whether moisture and air flow are present in the wallpaper for a long period, react with the glue to trigger mold.
(4) The weather is humid.
(5) The wallpaper is wet.
Moldy wallpaper is definitely a problem that people who are wallpapering are worried about. Additionally it is probably the most difficult complications to solve after emergence. Therefore, this kind of problem should be based on prevention. It is best to work before moisture and moisture.
Then, following the wallpaper has such problems, will there be no solution? of training course not.
2) Processing method
(1) The mildew is small. It is suggested to wipe with water or detergent and blow dry with a hair dryer.
(2) Bleaching water is 
simple to irritate the epidermis and may trigger the wallpaper to fade. It isn’t recommended.
(3) If the mold is large, the wallpaper needs to be replaced. If the wall structure is seepage, it is necessary to completely solve the problem before posting.
