Tyre reducing EPT/tire sidewall cutter/tire ring cutter
Approach flows: waste tires— circle slicing— strip slicing— slice slicing— magnetic separating— fiber separation-EPT-place in storage.
1. Tire Circle Reducing EPT is an on your own accent EPT, it puts the tire which is higher than 650 kind (each nylon and metal wire) flat on the EPT, locking tire within opening through up and down locking system, then placing alloy tools to focus on to the area of disintegration of tire to reduce off the mouth and country of tire, finished in three minutes
|Title of Product||Motor EPT||Fat||Ability||Specification||All round Dimension|
|Tire Circle Cutter||4KW||650KG|| 40pcs/h
(metal and nylon wire)
two.Metal Wire Separator is utilized to independent the metal wire from tire ring. The primary doing work part of this EPT is two relative rotary roll shafts with the same velocity. When tire circle lower into the middle of two rollers, it will be extruded by roll shaft, at the exact same time, be squeezed, Sheared and tear by the two relative rotary rollers. And finally total the separation of the steel wheel by numerous moments.
|Name of Product||Motor EPT||Bodyweight||Capacity||Overall Dimension|
|Metal Wire Separator||11KW||1300KG||100pcs/h||1.2m*1.4m*one.4m|
three. Tire Strip Slicing EPT make use of two spherical EPT chopping resources to mixture operating chopping. It can lower the tire of circle cutting into three-5cm vast strip, to use for dicer slicing. The materials of this EPT’s knife disk is EPT alloy structural metal (scientific identify: Nine-chrome-silicon), diameter of knife disk is Phi390mm, hardness is fifty eight-62GrS, far more sturdy. With the hand grinding wheel solid when not sharp, EPT is 4kw, revolting speech is 45r/min, form dimension: 1.3m*.8m*1.65m.
|Identify of Product||Motor EPT||Fat||Capacity||Strip Specification||All round Dimension|
|Tire Strip Cutter||4KW||850KG||two.5T/h||fifty*80mm||one.3m*.8m*1.65m|
four. Tire Block Reducing EPT is ready for the crush of host EPT, Not only it helps make the slicing strip-variety waste rubber minimize into about 3*5cm modest items, but also can EPTr into host EPT once again by means of mutual use in between sword and fixed knife, convenient to feed, large output and will not likely damage roller effortlessly, EPT is 5.5kw, revolting speech is 380r/min,form dimension: 1m*.8m*one.4m. To shell out focus to the place amongst sword knife and mounted knife when the EPT is in procedure, very best to keep at around .1mm, so that the steel wire can be cut off.
|Identify of Item||Motor EPT||Bodyweight||Capability||Dicer Specification||Overall Dimension|
|Tire Slice Cutter||5.5KW||800KG||.8T/h||thirty*50*80mm||1m*.8m*one.4m|
5.Loading and Shipping: