We frequently receive consultation on simple exclusive and beautiful wallpaper. Simple wallpaper because there is definitely no design, so even more likely to show up seam problem, after that, in the actual process we should deal with it? If the simple wallpaper shows up to present the phenomenon of seam, the first thing to judge the reason for its seam can be what can consider the appropriate treatment. 01 The problem of slit The wallpapers has no color difference, but the front 1.5 meters can discover the seam. Make sure you call to mind whether the joint is serious when the construction is handled. Many of the factors for the seams are caused by the building complications. [treatment] If the picture is usually a PVC wallpaper, you can use a moist bath towel to clean the damp seam, switch the wallpaper glue, carefully lift the wallpapers, and then soften the wallpaper with the wallpaper softener, so it is convenient to extend the picture to restoration the bones. If it is certainly real paper picture, almost no extensibility, therefore can not become used to repair the above technique, can be used with wall paper color tones to cover the bottom color. Two male and feminine If there is certainly no feeling of reliability between the wallpaper strips on the front 1.5 meters, the wall paper bones are managed well; the picture looks like a color difference, and the color difference between the joint parts is definitely structured on the obvious regulation of deep low deep shallow or low deep short depth: it might be caused by the Yin and Yang surface. Find the label of this wallpaper to see if there is usually an switching paste icon on it. (a downward arrow with an upwards arrow) [treatment] There are up and down alternately paste icons, based on the need for alternate pasting logo: shallow – shallow – deep – deep comparative, you can prevent the phenomenon of Yin and Yang. Three Light advantage If the dark wallpapers is usually present to become slightly much longer than the bottom paper, there will become white edges at the joints after the structure, and splits can end up being clearly seen at the front 1.5 meters away from the wall. [treatment] (1) because it is definitely plain colored picture, the wallpapers without building can be treated by a boundary slicing method. (2) if the wall paper provides been completed, it can be utilized to cover the background with the same color paint as the wallpaper. Four Spilled plastic Ordinary shaded wallpaper is definitely not simple to erase after overflow, and there are residual traces after rubbing. As a result, be careful when coping with overflow glue, try not really to keep footprints. Color picture 3D Wallcovering interest points: 1, in the building of the wall paper labels must be checked whether there can be “switching up and down” structure logo design, if there should be positive and bad paste, if the positive and unfavorable paste after the sensation of yin and yang can become attempted once again. 2, the building of basic nonwoven wallpaper should avoid glue and clean as considerably as feasible. Once wiping is usually performed, it will leave traces. If it is certainly overflowed, remove the spilled glue in a least area. The dark colored wallpaper should become soft. 3, PVC basic picture, the initial three wallpapers pasted fifty percent an hour after we must pay attention to check whether the joints of the wallpaper are stitched with balance, and the counteract is that the PVC wallpaper can not really become spilled.