Waste Tyre ShredEPTEPT Rubber PowEPTTire Miller
The EPT tire recycling EPT will be controlled by the PLC, all the materials will be process within of EPTs, there is Genuine ZERO Air pollution. 1 labor, 1 engineer can run all the EPTs, no want to work the EPTs, just management the PLC. the EPTs can shield the EPTs, function the EPTs and hold the EPTs perform smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automatic manage method, with automated reversal control program in overload problem. Two-shaft tire crusher is EPTly developed for outdated tires with lower pace and large torque to lessen noise and EPT consumption.
The blade of the shredEPTis created of high good quality steel and subjected to Bodycote heat treatment method to accomplish the greatest crushing performance.The shredEPTis simple to disassemble and modify cutter blade and suited for tearing large, further thick and hard components.The thickness variety of the crushing blade is 25mm-152mm in accordance to the tire variety,output and final solution. The grinEPTcan method OTR tires,huge truck tires,automobile tires and so on at the pace of 1-30tons whithin 1 hour.
| Product | Enter dimension | Output dimensions | Cappacity | Motor | Blades quantity | Proportions | Excess weight |
| TS-800 | 800mm | 50*50mm | 1-2T/h | two*22kw | 16pcs | 4*2.6*3.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | three-5T/h | 2*37kw | 20pcs | four.eight*2.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | 16-30pcs | five*2*three.4m | 18T |
| TS-1800 | 1800mm | fifty-150mm | seven-10T/h | two*55kw | twenty-24pcs | five.six*2*3.4m | 23T |
| TS-2000 | 2000mm | seventy five-200mm | 10-15T/h | 2*75kw | twenty-30pcs | six*2.four*4m | 36T |
| TS-2400 | 2400mm | 100-200mm | 20-30T/h | 2*110kw | 16-24pcs | seven.four*three.two*five.2m | 56T |
2.Rasper
EPT tire shredding system is created to produce up to six tons for every hour of wire free rubber mulch.This method produces up to a ninety nine% wire free of charge chip ranging in measurement among 12-25mm depending on the desired size.After processing,the metal is taken off by our magnetic separation technique.At this level,the wire totally free rubber chips are all set to be colored and employed for landscaping mulch and the metal is prepared to be baled and sold to smelters.
| Rasper | Motor | EPT | Capability | Dimensions | Bodyweight | Chopping chamber | Final product |
| R45 | Siemens | 45KW | three hundred-500kg/H | one.four*one.2*2.3m | 1700kg | 450*600mm | ten-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | one.seven*one.seven*2.3m | 1850kg | 450*800mm | ten-30mm |
| R75 | Siemens | 75KW | seven hundred-1T/H | two*two*four.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | 1-one.5T/H | two.one*two.one*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.5-3T/H | two*two.five*4.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.two*two.one*3.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Creating EPT is adopting bodily recycling technique and is created to grind the rubber mulch from the rasper into modest granules as good as 1-6mm. The granules are screened and re-circulated until finally the sought after size is arrived at. This Fully-Automated Tyre Recycling Line running in regular temperature, no need to include any other chemical compounds, no pollution to the surroundings. This is the best way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capability | 300-500kg/h | 500-800kg/h | 800-1500kg/h |
| Dimensions | one.eight*1.6*2.4m | one.eight*one.9*two.4m | 2.2*2.3*3m |
| Last product | 1-6mm | one-6mm | 1-6mm |
4.Miller
Rubber powEPTis the ultimate end result of ambient tire recycling.At this stage,crumb rubber is floor down into a clear powEPTform with virtually all steel and fiber taken off.Rubber powEPThas numerous secondary makes use of from injection molding goods,coatings,roofing materials and various asphaltapplications.
Rubber powEPTis typically identified in 40-seventy four microns(.40-.74mm) in dimensions.This micron measurement metarial has the benefit of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for a variety of polymers and completed products.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter item | Hefty obligation truck tyres to bicycle tyres | |||
| Enter measurement | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output dimension | shred to thirty-one hundred twenty mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Overall Kw | 680-760kw | 516-556kw | 347-372kw | a hundred and seventy-190kw |
FAQ:
Q1,Are you a manufacturing facility or a investing organization?
A. We are a company with 30 years generation expertise in tire recycling EPT. We have export license, we can offer you the manufacturing unit charges.
Q2. Can you guarantee the capability as you pointed out ?
A. Absolutely yes,other than that,we also give three-5years guarantee.
Q3, are you sure the last rubber powEPTcan be fully clear out of wire steel or nylon ?
A. The last powEPTpurity can achieve ninety nine.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
