Weather Resistance China Factory High Quality Quick Curing PU Adhesive for Fire-Rated Door

Adhesive is essential assistant material of anti-theft doorway, metal wood doorways, polymer doors, which refers to speak to with air curing solitary ingredient adhesive. With the attributes of higher bonding strength, good weathering resistance, straightforward to use, h2o resistance and so on, it is extensively utilized in iron and steel, galvanized metal plate, wooden composition and and so forth.

Software Desc.:

Honeycomb paper (incXiHu (West Lake) Dis.Hu (West Lake) Dis. aluminum honeycomb paper, polymer honeycomb paper, etc.) EPT foam glue. Utilised in require filling device bonding honeycomb paper and other paper items.

Utilised for bonding fireproof board, honeycomb paper in units this sort of as safety doors, and many others..

Bonding polystyrene foam board for use in gadgets such as protection doorways, etc.


one. Strong adhesion, shear, higher peel strength, large and minimal temperature resistance, hydrolysis resistance , heat resistance and aging resistance.

2. It can attain optimum actual physical performance right after curing at area temperature and no degumming phenomenon in the process of transfer printing of protection doorway.

3. The operational time adjustment is sturdy, it can be chosen according to the diverse time and diverse curing approach of Styrofoam.

four. Reduced toXiHu (West Lake) solvent, without having utilizing highly toXiHu (West Lake) Dis.c solvent to minimize expenses.

Complex Index:

Viscosity(with four cups, seventy seven ordmF):one hundred-300s

Powerful substance contentL78+-three%


1)Brushing method: the surface area of the working item is pretreatment #8594brushing glue #8594agglutination #8594curing. Cleaning the adhesive area of protection door to guarantee that no rust and no oil. It will impact the adhesion of Styrofoam if this portion not be good dealt with.

two)In orEPTto guarantee the energy of the adhesive, area the adhesive evenly coated scratch in the sticky floor. It’s better to scrape with plastic toothed blade scraper, it can not use hairbrush brush glue since of high viscosity. The dosage of glue can be verified by the embossed depth of door. Brushing ought to not be also thick, exposed time not as well EPT.

three)Shell out attention to pace the method of gluing, coating evenly. It need fast speed in summertime, not brush again and forth many moments. If the action is slow, you can place stress in the glue EPT, never wait around for the floor glue has dried and then place pressure on. Agglutination can be handled by cold pier or sizzling pier, the bare minimum time of cold pier is three-4 hrs and the least time of hot pier is fifteen-30 minutes. The cement time in excess of 10 hrs, it’s better that the backing temperature is a hundred ninety ~ 220C deg.

4)Make sure you seal use lid for the unused glue to avoid curing crust. The cleanse of tools can use ethyl acetate solvent, or it can be soaked in heat drinking water for a handful of minutes, and then wash with cleaning soap. This item must be saved in a dry, ventilated, sealed setting, please do not contact the water.


In the two method of brushing glue and stress on glue, it need to be concluded in the surface area drying time that generally significantly less than twenty minutes .

EPT amp Shipping and delivery:

EPT Information 200kg/drum, 80 drums for a 20” container.
Supply Time 15 daEPTafter buy

About us:
HangZhou XiHu (West Lake) (West Lake) Dis. Chemical Co., Ltd. is one particular of the largest adhesive manufacturers in China, EPTizes in the study, manufacture and marketing of distinct kinds of adhesives, incEPTd: Drinking water-Based mostly Homo-Polyvinyl Acetate Emulsion Adhesive, Polyurethane adhesive, spray adhesive, make contact with adhesive, footwear adhesive, wallpaper glue, and so on. OEM is accessible below.

Weather Resistance China Factory High Quality Quick Curing PU Adhesive for Fire-Rated Door

Weather Resistance China Factory High Quality Quick Curing PU Adhesive for Fire-Rated Door