EPT Tire Crusher EPT Tire Crusher Gear Rubber PowEPTLine
The EPT tire recycling EPT will be controlled by the PLC, all the resources will be approach within of EPTs, there is Actual ZERO Air pollution. 1 labor, one engineer can operate all the EPTs, no want to function the EPTs, just handle the PLC. the EPTs can protect the EPTs, work the EPTs and hold the EPTs operate smoothly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automatic management technique, with automatic reversal control system in overload issue. Two-shaft tire crusher is EPTly created for old tires with lower velocity and substantial torque to reduce sounds and EPT consumption.
The blade of the shredEPTis produced of large quality steel and subjected to Bodycote heat treatment method to accomplish the best crushing functionality.The shredEPTis easy to disassemble and modify cutter blade and suited for tearing big, added thick and tough resources.The thickness selection of the crushing blade is 25mm-152mm according to the tire type,output and last solution. The grinEPTcan process OTR tires,huge truck tires,auto tires and so on at the velocity of one-30tons whithin 1 hour.
| Product | Enter dimensions | Output dimensions | Cappacity | Motor | Blades amount | Proportions | Fat |
| TS-800 | 800mm | 50*50mm | 1-2T/h | two*22kw | 16pcs | four*2.six*three.2m | 8T |
| TS-1200 | 1200mm | 60*60mm | three-5T/h | 2*37kw | 20pcs | 4.eight*2.8*3.5m | 14T |
| TS-1600 | 1600mm | 50-150mm | six-8T/h | 2*45kw | 16-30pcs | five*2*3.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | seven-10T/h | two*55kw | twenty-24pcs | 5.six*2*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | ten-15T/h | 2*75kw | twenty-30pcs | six*2.4*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | twenty-30T/h | two*110kw | sixteen-24pcs | 7.four*three.two*5.2m | 56T |
2.Rasper
EPT tire shredding technique is developed to create up to six tons for every hour of wire free of charge rubber mulch.This program produces up to a ninety nine% wire totally free chip ranging in dimensions among 12-25mm dependent on the sought after dimension.Following processing,the steel is eliminated by our magnetic separation technique.At this point,the wire free of charge rubber chips are prepared to be coloured and employed for landscaping mulch and the metal is all set to be baled and sold to smelters.
| Rasper | Motor | EPT | Ability | Dimensions | Fat | Cutting chamber | Closing merchandise |
| R45 | Siemens | 45KW | three hundred-500kg/H | 1.4*1.two*2.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | 500-700kg/H | 1.seven*1.7*2.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | 700-1T/H | 2*2*four.1m | 3500kg | 550*800mm | 10-30mm |
| R90 | Siemens | 90KW | 1-1.5T/H | two.one*two.1*4.1m | 4200kg | 550*1000mm | ten-30mm |
| R132 | Siemens | 132KW | one.five-3T/H | 2*two.five*four.1m | 6100kg | 742*1200mm | ten-30mm |
| R315 | Siemens | 315KW | 3-6T/H | 6.two*two.1*three.6m | 12400kg | 697*1562mm | 10-30mm |
three.Granulator EPT
Waste Tire Recycling Rubber Granule Generating EPT is adopting physical recycling technique and is created to grind the rubber mulch from the rasper into little granules as good as 1-6mm. The granules are screened and re-circulated until the preferred dimension is achieved. This Totally-Automated Tyre Recycling Line operating in normal temperature, no need to include any other chemicals, no air pollution to the atmosphere. This is the greatest way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | 300-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Proportions | one.8*1.six*two.4m | 1.8*one.nine*two.4m | two.two*two.3*3m |
| Closing item | 1-6mm | one-6mm | one-6mm |
4.Miller
Rubber powEPTis the last outcome of ambient tire recycling.At this phase,crumb rubber is floor down into a thoroughly clean powEPTform with practically all metal and fiber eliminated.Rubber powEPThas many secondary uses from injection molding products,coatings,roofing materials and a variety of asphaltapplications.
Rubber powEPTis usually found in forty-74 microns(.40-.74mm) in size.This micron measurement metarial has the advantage of being incorporated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and concluded products.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Input product | Hefty duty truck tyres to bicycle tyres | |||
| Input dimensions | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output measurement | shred to thirty-120 mesh rubber powder | |||
| Capability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
FAQ:
Q1,Are you a factory or a investing company?
A. We are a company with 30 several years creation expertise in tire recycling EPT. We have export license, we can provide you the manufacturing facility prices.
Q2. Can you guarantee the capability as you described ?
A. Definitely sure,apart from that,we also give three-5years warranty.
Q3, are you confident the last rubber powEPTcan be entirely clean out of wire steel or nylon ?
A. The closing powEPTpurity can attain 99.9%. we have magnetic separator which can separate the wire steel from the rubber powder.
