HangZhou EPTrui Waste Tire Recycling EPT for rubber powder
It has subsequent outstXiHu (West Lake) Dis.Hu (West Lake) Dis. advantages:
No pollution: Independent the fiber, wire and rubber completely unEPTnormal temperature by physical approaches, zero-emission of squander gas, drinking water and feigh.
Lower usage: Most affordable strength usage and labor expense. Utilized Tyre Recycling Plant.
Large capability: Able of disposing the squander tires which the diameter is significantly less than 1250 mm into 5-40 mesh crumb rubber.
Our EPT squander tire recycling rubber powder creation line is utilised to make squander tires and rubber into rubber crumb and rubber powder.
1.Process movement:
Waste tire-tire circle cutter -tire strip cutter-tire slice cutter-XKP 350/four hundred/450/560/560L–magnetic separator-fiber separator–finished goods (rubber powder).
two. This manufacturing line incXiHu (West Lake) Dis.Hu (West Lake) Dis. the under:
|
Title of gear |
Quantity |
Instruction |
|
|
Host gear |
Rubber crusher |
one |
Design No.: XKP350/XKP400/XKP450/XKP560/XKP560L |
|
AuXiHu (West Lake) Dis.liary EPT |
Tire Circle cutter |
1 |
To lower open the joint of the tire’s facet and top |
|
Tire Strip cutter |
one |
Reserve the wire hoop, cut the ties without having sidewalls into strips |
|
|
Tire Slicing cutter |
one |
Minimize the strips into chunks about 3.five cubic centimeter |
|
|
Primary vibrating display screen |
one |
Individual the rubber powEPTfor the very first time (5-10 mesh) |
|
|
Conveyor/feeder |
one |
To transfer the rubber powEPTthat could not satisfy the mesh count’s requirement back to host EPT to crush once again |
|
|
Fiber separator |
one |
Separate the concluded solution of rubber powEPT(ten-40 mesh) |
|
|
Magnetic separator |
2 |
Extract and different psychological wire from the rubber powder |
|
|
Remark |
The earlier mentioned equipments constitute the comprehensive established of scrap tire rubber powEPTEPT. |
||
|
Metal wire separator |
1 |
Specific for extract wires in the tire’s circle |
|
(1) Tire circle cutter
The circle chopping EPT is an by itself accessory EPT, it places the tire which is higher than 650 type (equally nylon and steel wire) flat on the EPT, locking tire inside of opening by means of up and down locking method, then putting alloy resources to concentrate on to the location of disintegration of tire to reduce off the mouth and nation of tire, concluded in 3 minutes. The EPT is 4kw revolting speech is 40r/min, Condition dimension:one.8m*1.3m*1.6m.
|
Identify of product |
Motor EPT |
Fat |
Ability |
Specification |
Overall dimension |
|
Tire circle cutter |
four.75KW |
650 kg |
40pcs/h |
650- 1250 mm (Equally reinforced tire and nylon tires) |
one.8m*one.3m*1.6m |
(2) Tire Svacation cutter
Tire strip reducing EPT make use of two round EPT cutting instruments to blend operating reducing. It can reduce the tire of circle slicing into three-8mm broad strip, to use for dicer slicing. The content of this EPT’s knife disk is EPT alloy structural steel (scientific identify: 9-chrome-silicon), diameter of knife disk is Phi390mm, hardness is 58-62GrS, much more sturdy. With the hand grinding wheel cast when not sharp, EPT is 4kw, revolting speech is 45r/min, condition dimension: 1.3m*.8m*1.65m.
|
Identify of solution |
Motor EPT |
Operate assortment |
Processing pace |
Demission |
Weight |
|
Tire strip cutting EPT |
five.5KW |
tire of 650-1250 mm |
twenty-35 strips/h |
1.3m*.8m*one.65m |
850 kg |
(three) Tire Slice cutter
Tire slice slicing EPT: the EPT is geared up for the crush of host EPT, it tends to make the slicing strip-type squander rubber cut into about 3*8cm little parts, which can EPTr into host EPT very easily, substantial output and will not likely hurt roller.
|
Name of solution |
Motor EPT |
Weight |
Made yield |
Dicer specification |
|
Tire slice slicing EPT |
5.5 KW |
800 kg |
.eight T/h |
three*5*eight cm |
(four)Steel wire Separator
(five)Tire crusher’s Complex parameter:
|
Product No. |
XKP-four hundred |
XKP-450 |
XKP-560 |
XKP-560L |
|
Diameter of front roll |
400 mm (groove) |
450 mm (groove) |
560 mm (groove) |
560 mm (groove) |
|
Diameter of back roll |
four hundred mm (groove) |
450 mm (groove) |
510 mm (groove) |
560 mm (groove) |
|
Drum doing work length |
600mm |
760mm |
800mm |
1000mm |
|
Entrance roll liner pace |
34.five m/min |
38. m/min |
forty.6m/min |
44m/min |
|
Roll ratio |
1:two.five |
one:2.5 |
one:2.five |
one:two.five |
|
Max roller spacing |
10 mm |
ten mm |
ten mm |
10mm |
|
Motor EPT |
45KW/55KW |
75KW/90KW |
90KW/a hundred and ten KW |
132KW/160KW |
|
Weight |
8.5 T |
11T |
seventeen.5T |
23T |
|
L*W*H |
four.3*one.8*1.6m |
4.six*2.*1.65m |
5.3*two.*1.7m |
five.six*2.*1.7m |
| Suggestions: Each rollers are grooved which can enhance the output. Roller material is Alloy 5Cr6MnMo. There are 8 items bearing inside of the EPT , all rolling bearing(anti-friction bearing). |
||||
three.Shipping and delivery images of tire recycling EPTs
